Consolidated Carbide, Ltd., is constantly innovating and advancing the trencher and trenchless industry. If you're in need of a special part, please contact us and we would be happy to assist you.

The SH1654 is designed for all walk-behind trenchers. This tooth is not only on a 1.654 Shark Chain^®, but also on 1.654 bolt on side mounts. The side mounts are available with a left, right, and a center cut. The Shark Tooth^® can also be strategically placed on augers, and is very popular on the horizontal backreamers.

  click photo to enlarge

The SH200 is 3/4" wide and has a narrower cut than the SH300. This special shaped carbide is designed for production and production it will deliver. This tooth is manufactured for the mid-sized rubber tire trenchers, and is a great addition in the horizontal boring market.

click photo to enlarge

The SH300 & SH300-N is a very popular tooth in the higher horsepower range. This special cutting tool has an extended life due to the  large size and it's special shape. It is used in the trenching/horizontal industry as well as in the logging industry for debarking trees, and also the asphalt grinding industry. You will also see this tooth on many different auger applications.

click photos to enlarge

This cutting tool can be used 100% or in combination with Cup Teeth. Here you have the best of both worlds. The Shark Side Mount^® breaks open the ground making it easier for your Cup Teeth to enter. This will save wear on the Cup Teeth plus making the digging easier. These brackets have been tested with great results, with many similarities to the Shark Chain^®, except for one big difference - This bracket bolts onto the chain!

Most common sizes...
1.654, 2.00, and 3.067 chain pitch.

click photo to enlarge

These brackets are used on 50,000 lb (50K) and 110,000 lb (110K) chain.

This will give you the same benefits as with the Shark Chain^®, plus the advantage of easy replacement. They are designed for production and will dig through difficult ground conditions.

click photo to enlarge

The Shark Chain^® is designed for today's trenchers. It will dig in the hardest ground conditions with ease and will out-perform any digging chain on the market today. Its patented design eliminates most of the boom bounce or kick back, reducing wear on the teeth and chain. This in turn relieves much stress on the trencher. No more nuts, bolts or tube spacers.

Shark Chains are offered from walk-behinds to ride-on trenchers. For more information, contact your local dealer.

click photo to enlarge